Tuesday, November 24, 2009

Preparing Your Floor for Natural Stone Tile

Preparing Your Floor for Natural Stone Tile

Natural flooring materials much as slate, granite, limestone, and modify marble, are becoming rattling popular in architectural installations. This is part of an overall design way in which we are transfer the actual world of nature backwards into our recent lives, by using materials which are taken from the earth.

With some materials you crapper install the tile correct over existing flooring if it is rugged enough. However with natural pericarp this crapper be risky, as modify the slightest imperfectness in the pad crapper hurt a tile project. Therefore the old floor will have to be removed. This will be easier with some materials much as vinyl, and harder with others much as ceramic and stone.

When instalment natural pericarp the most important thing you have to clear attention to is the calibre of the pad you are instalment on. Underlayment refers to the layer which is placed between the subfloor and whatever surface flooring you choose. When removing old tiles, be rattling careful not to alteration this layer with knives or scrapers. When finished with removal, be sure to repair this surface by sanding or using devastation compound.

Often when removing old tiles, it is easier and desirable to only vanish the old pad and replace it. This is often finished when removing natural stone, ceramic, or other materials which are difficult to pull up without damaging the underlayment.

Stone tile requires an pad which is resistant to changes due to temperature and moisture. Plywood is alright for instalment ceramic tile in a dry room, but for natural pericarp you will want to place something much as cement board downbound to secure the calibre of the installation.

Before instalment check the surface of your pad carefully to secure that it is perfectly smooth and free from defect. Be on the lookout for irregularities, water damage, or weak joists. If there are rises or dips in the surface, a devastation compound crapper be applied to fill them in. Imperfections at this level crapper termination in tiled floors which are uneven, or where tiles stick discover crookedly and break when stepped on. Even if a problem doesn't hap immediately after installation, a poor underpayment crapper lead to maintenance problems downbound the line.
Article Source: http://EzineArticles.com/?expert=Jim_Slate

No comments:

Post a Comment